Mitsubishi WD-65000 Owner's Manual page 15

Special Setups:A/V Equipment (For System 4 Home Theater IR Control)
VCR: Connect the cables to the TV as
directed on page 17, with one exception.
Connect the audio output connection to the
appropriate input on the back of the A/V
receiver (as shown in table 1).
DVD: Connect the cables as directed on
page 19 (using the COMPONENT-1 input),
with one exception. Connect the digital audio
output connection on the DVD player to the
appropriate digital input on the back of the
digital A/V receiver (as shown in table 1).
DTV: Connect the cables as directed on
pages 20 - 21, with one exception. Connect
the digital audio output connection on the
DTV receiver to the appropriate digital input
on the back of the digital A/V receiver (as
shown in table 1).
A/V Receiver: Connect as directed on page
18, with two additions. Use a S-Video cable
in step 1 if you have a S-Video VCR. The TV
outputs should be connected to the A/V
receivers input marked TV.
• Auto Standby: ON (See your A/V receiv-
er's Owner's Guide for this procedure). For
all TV use, the sound will come from the A/
V receiver. Not available with all
A/V receivers.
• Digital Input Assignment for DVD: As-
sign the digital input you used for your
DVD player to the A/V receiver's DVD
input selector. This procedure is explained
in your A/V receiver's Owner's Guide.
Brand Model
Mitsubishi
M-VR1000 / M-VR800
Mitsubsihi
M-VR900 / M-VR700
Denon
AVR2800
JVC
RX-888V
Kenwood
VR-2080
Onkyo
TX-DS575
Pioneer
VSX-21
Sony
STR-DE825
Yamaha
RX-V2095
Table 1. A/V receiver back panel input table
• Digital Input Assignment for DTV: As-
sign the digital input you used for DTV to
the A/V receiver's DTV input selector. This
procedure is explained in your A/V receiv-
er's Owner's Guide.
Infrared Emitter: Connect as shown on
page 22.
Special Setups:TV
Menu selection for A/V connections, page 42.
• TV Speakers: OFF
• Audio Output: Fixed
• TV Inputs Appropriately Named : See
Assign Input Menu , page 33.
Remote Control, pages 26 - 27.
• Set the slide switch to the TV position and
follow the programming instructions using
the A/V receiver code appropriate for your
A/V receiver, page 27 (figure 5).
The products listed at the top of this column connect to the below listed
inputs on the back of the appropriate A/V receiver.
SAT/DBS/DTV
TV / Cable
VCR2
TV
CABLE/DBS
TV
VCR2
TV/DBS
VIDEO 2
TV
LD
AV AUX
VIDEO 2
VIDEO 3
VIDEO 2
TV/SAT
VIDEO 2
TV/DBS
VCR 2
TV/DBS
Part II: Installation
DVD
VCR
VCR1 DVD
VCR DVD
VCR1 DVD/LD
VCR 1 DVD
VIDEO 1 DVD
VIDEO 1 DVD
VCR 1 DVD/LD
VIDEO 1 DVD/LD
VCR1 DVD/LD
15