Split Screen - Mitsubishi Electric WD-57732 Owner's Manual

Dlp high-definition television
Hide thumbs Also See for WD-57732:
Table of Contents

Advertisement

52
Chapter 4. TV Operation and Features

Split Screen

Split Screen allows you to view pictures from two different
sources at the same time. Split Screen is available when
you have video sources connected to the TV in addition to
connections on ANT 1 or ANT 2.
Operation
Split Screen Operations
Turn Split Screen on or off
Switch the sound source between main
and sub-pictures.
Check which picture is the sound source.
Change the source of the sub-picture.
Change sub-picture channel (when the
input source is ANT 1, ANT 2, or a
NetCommand-controlled cable box or
satellite receiver).
Freeze or unfreeze the sub-picture.
Change the size of the main and sub-pic-
tures.
Make the sub picture fill the screen.
"SPLIT" appears under the
Video icon to distinguish
this menu from the Input
Selection menu.
Figure 5. Change the source of the sub-picture with the
Split Screen Input Selection menu.
Instructions
Press SPLIT.
Press
or . The speaker icon appears briefly to indicate the
sound source as either the main picture (left) or sub-picture
(right). The sound source is the side you can control with the
remote control.
Press INFO. The speaker icon appears in the information display to indi-
cate the sound source.
1. Press
2. Press INPUT and move the highlight to the icon for the input you wish
to view as the sub-picture (see figure 6).
3. Press ENTER to make the change.
Grayed-out input icons are unavailable as Split Screen sources or with
the current source.
Press
to make the sub-picture the sound source then press CH
(PAUSE). Press
Press
Repeatedly press FORMAT to cycle through picture sizes. See the follow-
ing page for sample displays.
1. Press
2. Press SPLIT to close Split Screen mode.
Choice of Split Screen
sub-Picture Sources
to make the sub-picture the sound source.
again to return to normal moving video.
to make the sub-picture the sound source.
Split Screen is unavailable if your only
inputs are ANT 1 and ANT 2.
A 1080p signal from an HDMI jack or a per-
sonal computer can be viewed only as the
main picture.
IMPORTANT
/
.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wd-65732Wd-73732Wd-y57Wd-y65Wd-65732Wd-73732 ... Show all

Table of Contents