Setup; Video Adjustments; Using The Tv With A Personal Computer - Mitsubishi Electric WD-57732 Owner's Manual

88
Chapter 7. Using the TV with a Personal Computer

Setup

1. See the TV specifications in Appendix B to confirm
that your computer video signal is compatible with the
TV.
2. Note whether the computer supplies a digital or
analog video signal. You will need this information
during the setup procedure.
• Digital video signal: Comes from the computer's
DVI or HDMI output.
• Analog video signal: Comes from the computer's
VGA 15-pin output and requires a VGA-to-DVI
cable or a VGA cable and VGA/DVI adapter.
3. Power on the TV.
IMPORTANT
In the next step, select the correct video signal
type (analog or digital) in the NetCommand
menu. Otherwise, the TV will be unable to
display a picture from the computer.
4. Press MENU to open the Main menu, highlight the
NetCommand icon, and press ENTER.
5. Highlight the PC-DVI text box and press
the setting to match your computer's video signal
type, either Digital or Analog.
to change