Operation Of Pip And Pop - Mitsubishi Electric WD-52825 Owner's Manual

Operation of PIP and POP

You can display programs from analog channels, analog inputs or devices as Picture-In-Picture (PIP) and Picture-
Outside-Picture (POP). The TV has a second analog tuner for non-scrambled analog channels received on Ant-1 and
will display them as the PIP/POP sub-pictures. Digital channels and devices can be shown as the main picture but
cannot be the sub-picture. PC screens can be viewed in the side-by-side mode.
Press PIP/POP to activate the PIP/POP option. With
each press of the PIP/POP button on the TV remote
control (within seconds of each other), the PIP/POP
will cycle through the following display options:
MAIN
Side-by-Side
PICTURE
MAIN
PICTURE
POP 1 POP 2
MAIN
POP 4 POP 5
PICTURE
POP 7 POP 8
Ant-1 2 XXXX
Standard
Stereo SAP
TV-PG DLSV
SQV1
Ant-1 2 XXXX
Standard
Stereo SAP
TV-PG DLSV
SQV1
Ant-1 2 XXXX
Standard
Stereo SAP
TV-PG DLSV
SQV1
• POP
side-by-side
pictures
POP 1
• 3 POP
POP 2
POP 3
POP 3
POP 6
• 9 POP
POP 9
PIP Ant-1 17
• PIP large
PIP
PIP Ant-1 17
• PIP small
PIP
• PIP/POP: off
To turn PIP/POP off, wait at least 10 seconds, and
press PIP/POP. The next time you activate PIP/POP,
the last used PIP/POP option will be displayed
Changing PIP/POP Device
Press PIP DEVICE to change the PIP or POP picture
source device. A menu similar to the Device Selection
menu will be displayed.
Changing PIP/Side-by-Side Channels
Press PIP CH to scroll up and down through
memorized channels on Ant-1 and Ant-2.
Exchanging Program Images
Press EXCH to exchange the main picture and the PIP/
POP picture. Pictures from digital channels can only
be shown as the main picture.
Moving PIP Image
If no menus are onscreen, press ADJUST
to move the PIP display anywhere on the main screen.
Automatic POP Switching
When automatic POP switching is active, the TV will
cycle through memorized analog channels on Ant-1 or
Ant-2 or strobe pictures from other A/V components
in the POP display. Press PAUSE to pause or restart
automatic POP switching.
Selecting POP "Live" Image
Press ADJUST , , or
"live" image (automatic POP switching must be paused.)
Freezing the PIP and Side-By-Side Picture
Press PAUSE to freeze the PIP and side-by-side
images. Press PAUSE again to return to a "live" image.
Side-by-Side cannot show the same channel or
device on both sides.
If Ant-1 or Ant-2 is the main picture, Ant-2 is not
available as a PIP, POP or Side-by-Side.
PIP/POP is not compatible with signals from
media cards.
If TV Pause is set to "Always" PIP/POP and Side-
by-Side are not available.
, ,
to select a different POP
IMPORTANT
or
79