Troubleshooting - Olympus WS-853 User Manual

Hide thumbs Also See for WS-853:
Table of Contents

Advertisement

Troubleshooting

Problem
The display is blank.
Unable to operate the
voice recorder.
Unable to record.
Playback is inaudible.
The recording is too
quiet.
Possible cause
The battery is not inserted
properly.
The remaining battery power
is low.
The power is OFF.
The remaining battery power
is low.
The power is OFF.
The voice recorder is in HOLD
mode.
There is no remaining memory.
The maximum number of
recordable files has been reached.
The earphones are connected to
the earphone jack.
The volume is set to [00].
A low recording level has been
set.
The output level of the connected
external device may be too low.
Solution
Check that the positive and negative
terminals of the battery are placed
correctly (☞  P.8).
Replace or charge the battery
(☞ P.8, P.11).
Turn the power ON (☞ P.9).
Replace or charge the battery
(☞ P.8, P.11).
Turn the power ON (☞ P.9).
Release HOLD mode (☞ P.17).
Erase unneeded files (☞ P.38).
Select another folder (☞ P.19).
To output the playback through the built-
in speaker, disconnect the earphones.
Adjust the volume (☞ P.30).
Redo recording after setting the recording
level to [High] (☞ P.44).
Adjust the output level of the external
device.
6
EN
65

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ws-852

Table of Contents