Olympus WS-853 User Manual page 29

Recording from another connected device
6
Connect the voice recorder
with another device using the
connecting cord KA333.
To audio output terminal
of other device
To microphone
jack
Press the REC ( s) button to start
7
recording.
8
Start playback on the other
device.
9
When duplication is completed,
press the STOP (4) button to stop
recording.
• When [Duplication (Timer)] was
selected, recording automatically
stops when the set time is reached.
NOTE
• Do not plug or unplug devices into
voice recorder jacks while recording.
• Perform adjustment of the recording
level on the other device.
• To ensure successful recording, we
recommend that you test the record
function and volume before use.
• In [Duplication (Auto Divide)], an
original recording will be copied to
separate files divided into each song by
the signal level or the noise level of a
silent part. When the signal level is too
low or the noise is significant, recording
and division may not be performed
properly.
In that case, select [Duplication
(Timer)] and manually start and stop
recording.
• If the connecting cord is not connected
when [Duplication] is selected, the
message [Connect an audio cable to
the mic jack] is displayed.
2
EN
29