Olympus WS-853 User Manual page 47

Recording menu [Rec Menu]
Adjusting the voice sync level for voice sync
recording
Press the REC ( s) button to
1
prepare for recording.
Press the 9 or 0 button to
2
adjust the voice sync level.
a Voice sync level (moves left/right to
match set level)
• The voice sync level can be adjusted to
a setting between [01] and [15].
• Increasing the setting number increases
the activation sensitivity, enabling
quieter sounds to activate the start of
recording.
Press the REC ( s) button again.
3
• The blinking message [Standby]
appears in the display, and the LED
indicator light flashes.
• Recording starts automatically if the
input is louder than the voice sync
level.
TIP
• The voice recorder automatically ends
recording and returns to recording
standby mode when the input sound
has been below the voice sync level
for at least the set detection time.
Each time the voice recorder enters
standby mode, the current file is closed.
Recording continues in a new file the
next time sound is detected.
• Press the STOP ( 4) button to end a
voice sync recording session.
a
NOTE
• The following functions are disabled
when using the [V-Sync. Rec] function:
• [Rec Scene] (☞ P.25)
• [VCVA] (☞ P.45)
4
EN
47