Connecting To The Network Through Lan Interface - Pioneer SCLX59-K Operating Instructions Manual

03
Multi-zone connection using the HDMI terminal and speaker terminals
(HDZONE)
Important
! The settings must be changed at ZONE Setup in order to use the HDZONE function
! To use the HDZONE functions, set Control or Control Mode in HDMI Setup to OFF. For details, see
Setup on page 83 .
! It is neccessary to set the Speaker System to 7.2ch + HDZONE, 5.2 Bi-Amp+HDZONE, or
(page 110 ).
5.2 +ZONE 2+HDZONE
1 Connect the speakers to the EXTRA 1 terminals, or the SURROUND BACK terminals.
Which speaker terminal is connected defers depending on the Speaker System
see Installing your speaker system on page 26 .
The following diagram shows the connection with the EXTRA 1 speaker terminals.
2 Connect a TV monitor to the HDMI OUT 3 (HDZONE) terminal on this receiver.
Sub zone (HDZONE)
2
HDMI IN
L R
1
(page 114 ).
(page 110 ) setting. For details,
Main zone
HDMI OUT
1 2 3
MAIN (HDZONE)
ARC CONTROL SELECTABLE
HDMI OUT
1 2 3
MAIN (HDZONE)
EXTRA 1
R
ARC CONTROL
SELECTABLE
EXTRA 1
R

Connecting to the network through LAN interface

By connecting this receiver to the network via the LAN terminal, you can listen to Internet radio stations. To listen
to Internet radio stations, you must sign a contract with an ISP (Internet Service Provider) beforehand.
When connected in this way, you can play audio files stored on the components on the local network, including
your computer.
HDMI
NETWORK HDMI OUT
to LAN port
NAS
L
L
Connect the LAN terminal on this receiver to the LAN terminal on your router (with or without the built-in DHCP
server function) with a straight LAN cable (CAT 5 or higher).
Turn on the DHCP server function of your router. In case your router does not have the built-in DHCP server func-
tion, it is necessary to set up the network manually. For details, see
LAN terminal specifications
! LAN terminal : Ethernet jack (10BASE-T/100BASE-TX)
Notes
! When connecting to the network via wireless LAN, or when using the Bluetooth feature, use with the wireless
antenna upright.
! The range limit of the wireless antenna is indicated in the following diagram. Applying unneccessary force may
result in damage.
! Refer to the operation manual of the equipment you have as the connected equipment and connection method
may differ depending on your Internet environment.
! When using a broadband Internet connection, a contract with an Internet service provider is required. For
more details, contact your nearest Internet service provider.
45
Connecting your equipment
NETWORK
Internet
Modem
Computer
LAN
3 2 1 WAN
LAN cable (sold separately)
to LAN port
Setting network connection
Wireless antenna
Router
on page 51 .