Chapter 3: Tv Operation; Remote Control - Mitsubishi WD-62530 Owner's Manual

30
Chapter 3. TV Operation

Remote Control

Overview
1. Slide Switch: Selects the A/V device to be controlled
by the remote control. Set the slide switch to TV for
operation of the TV . Control of other device types
requires programing (see Chapter 5).
2. SLEEP: Sets the TV to turn off within 2 hours. See the
next page for instructions.
3. Digits/Letters: Allow you to tune to a channel by
entering channel numbers; press ENTER for faster
tuning. Use numbers and the —/CANCEL key to enter
digital sub-channels.
Also use for entering information (letters and numbers)
to name channels. To select letters, repeatedly press
the associated number key. For example, to enter "C"
press the 2 key four times, then press ENTER. The fol-
lowing special characters are available with the 1 and 0
keys:
1
0
4. —/CANCEL (SUB-CHANNEL/CANCEL): When entering digital
channel numbers, adds a separator between main
and sub-channel numbers. Clears FAV and some
menu entries.
5. POWER: Turns TV power on and off.
6. QV (QuickView™): Switches between the current
channel and the last channel viewed.
7. MUTE: Turns TV sound off or on.
8. SPLIT: Turns Split Screen mode on and off.
9. VOL / (Volume Up/Down): Changes sound level.
10. CH/PAGE / (Channel or Page Up/Down): Scans
up or down through memorized channels. Pages up
and down through screens when used with TV Guide
On Screen® or ChannelView™.
11 FAV (Favorites): Scans through memorized lists of
favorite channels. See "Channel Menu" in chapter 4,
"TV Menu Settings," for more information.
Note:
The TV's remote control can operate other
audio/video devices.
See Chapter 5 for:
instructions on programming the remote.
a list of functions available for controlling other
devices.
! & blank space
/ * -
12. FORMAT: Changes the shape and size of the main TV
picture. When in Split Screen mode, changes the
size of the split images while maintaining their aspect
ratios.
13. INPUT: Displays the Input Selection menu from which
you can select an input source to view, such as an
antenna input (ANT 1/2) or a connected device.
14. (Adjust Up/down/Left/Right): Navigate
menus and change settings.
15. ENTER: Selects a channel number or menu item.
16. GUIDE: Displays or removes ChannelView™ on-screen
channel listing for ANT 1 and ANT 2.
17. INFO: Displays an on-screen summary of the current
device in use and any broadcast information available,
including current V-Chip information. See Chapter 3
for details.
18. AUDIO: Selects individual audio settings for adjustment.
19. VIDEO: Selects individual video settings for adjustment.
20. MENU: Displays the main TV menu using the
on-screen menu system. When a sub-menu is open,
backs up one level.
21. EXIT: Closes all TV on-screen menus and displays and
returns to normal TV viewing.
22. F1–F4: When programmed, these buttons work like the
A, B, C, D buttons on some cable boxes and satellite
receivers. Program the remote control for your equip-
ment and test the keys. See Chapter 5.
24. (PAUSE): Freezes a broadcast TV picture. When
Split Screen is displayed, freezes the sub-picture.
See below for use with recordable media.
Record/Playback Keys
To enable the recording and playback functions, program
the remote for your VCR or DVD player/recorder and set
the slide switch to VCR or DVD. See Chapter 5 for instruc-
tions on programming the remote.
23. (RECORD): Records with a VCR or DVD recorder.
24. (PAUSE): Pauses a VCR or DVD. See above for use
during TV viewing.
25. (STOP): Stops play of a VCR or DVD.
26. (REVERSE): Rewinds a VCR. Reverse scans a DVD.
27. (PLAY): Plays a VCR or DVD.
28. (FAST FORWARD): Fast forwards a VCR. Forward
scans a DVD.