Daikin EKHBH008BB3V3 Operation Manual page 26

A
PPENDIX
(for restricted power supply condition mode only)
Programming space heating
5 sec
5 sec
Operation manual
25
Programming space heating is carried out as follows:
1
2
3
4
5
6
7
8
9
10 Use the
11 Use the
12 Use the
13 Press the
5 sec
14 Repeat this sequence for all days of the week.
15 Now the unit is programmed to stop space heating between 2:00
5 sec
INFORMATION
■
This example describes the procedure when no
program is scheduled yet.
■
Returning to previous steps in the programming
procedure without saving modified settings is done by
pressing the button.
Press the button.
The actual mode is blinking.
Use the and buttons to select the heating mode.
Press the button to confirm the selected mode.
The actual day is blinking.
Select the day you would like to consult or to program by means
of the and buttons.
The selected day is blinking.
Press the button to confirm the selected day.
Press the button for 5 seconds to enter the programming
mode.
Action number 1 will be displayed
Use the and buttons to set the correct action time
to 2:00.
Use the button to select
button to select action number 2.
and buttons to set the action time to 4:00.
button to select what the unit should do from 4:00
onwards.
■ For space heating:
- : set the temperature by means of the
buttons.
- : to select automatic temperature calculation.
button for 5 seconds to store the programmed
actions. When the program is stored, icon
on the remote controller.
and 4:00. The unit will start space heating from 4:00.
INFORMATION
■
By pressing the
return to previous steps in this procedure and
finally return to normal operation.
■
Other actions can also be programmed. See
"4.7. Programming and consulting the schedule
timer" on page
Indoor unit and options for air to water heat pump system
as action.
is displayed
button several times, you
9.
EKHBH/X008BB
4PW62571-1A – 05.2011
and