General Operation - LENCO MC-148 DAB+ User Manual

GENERAL OPERATION

STANDBY MODE
Press the STANDBY button on the unit or the remote control to turn on
the system or to put the system into standby mode. To resume normal
operation, press either button again.
VOLUME CONTROLS
Rotate the VOLUME control clockwise or press the VOLUME+ button to
increase the volume level.
Rotate the VOLUME control anti-clockwise or press the VOLUME- button to
decrease the volume level.
MUTE FUNCTION
Press the MUTE button at any time to silence the output. Press again to
resume.
DSP EFFECTS
Press the DSP button repeatedly to alter the sound field: Jazz, Rock,
Classic, Pop, Live, Dance and off.
LOUDNESS FUNCTION
This function will add a rounder bass sound at low levels. Press the LOUD
button on the remote control to enable the effect. Press again to disable the
effect.
SWITCHING MODES
To switch between the mode: CD, FM, DAB+, and AUX IN. Press SOURCE
button on the unit to cycle through the modes or press the relevant button
on the remote control from CD, DAB/FM, and AUX IN.
Press DAB/FM button repeatedly to switch between DAB+ and FM mode.
TONE CONTROLS
Adjust the Bass and Treble tone controls.
1. Press the TONE button on the remote control.
2. The first adjustment is Bass. Use the VOL+/- buttons to adjust.
3. Press the TONE button again to edit Treble. Use VOL+/- buttons to
adjust.
4. Press the TONE button once more to edit Volume. Use the VOL+/-
buttons to adjust.
6