Basic Operation - LENCO MDV-15 Instruction Manual

BASIC OPERATION

Preparation
1) Before turn on the unit, check if all the connections are right and safely made. Insert The
plug in the corresponding power socket.
2) Press the POWER button on the front panel of this unit.
3) Press the EJECT button on front panel of this unit, then put the disc on the disc holder and
press this button again. The player will start playing.
Mute button
If you press the MUTE button during playing, sound signal will not be heard, but the picture will
remain. Press the MUTE button again or the VOL+/- button to resume the previous volume
level.
State indication
While playing a disc, press the Display button, the following information will appear On the
display :
VCD/CD items : TR (track remain), total elapsed, DR (directory remain), single elapsed.
DVD items : title elapsed, title remain, chapter elapsed, chapter remain, display off.
Select channel/language
While playing VCD disc, press the LANG/(L/R) button to select one of the playing modes:
Mono L, Mono R, Mix-Mono and Stereo. Press this button to switch channel modes one by one.
While playing DVD-disc, use the LANG/(L/R) button to select sound language provides. (If the
DVD supports this function.)
Fast Forward and Rewind
While playing a disc, press the
The speed changes in the following way:
Fast Forward : 2 times faster, 4 times faster, 8 times faster, 16 times faster, 32 times faster, play.
Back Rewind : 2 times faster, 4 times faster, 8 times faster, 16 times faster, 32 times faster, play.
Previous and next
While playing disc, press the
press button to go the next song/chapter.
TU+ or TU- button to fast forward and fast rewind.
button on the remote control to go to the previous song/chapter;
8