Troubleshooting - LENCO MC-148 DAB+ User Manual

Speaker Size
Net Weight

TROUBLESHOOTING

In the unlikely event of difficulties with your appliance please follow the
trouble shooting guide below.
Problem
No Power
No Sound
CD/AUX/RADIO.
No Sound from
AUX input.
Sound is distorted.
Sound is distorted
from AUX input.
Unable to Play
Static Sound
Desired station not
found.
Weak or no DAB +
signal
I can hear a
burbling noise on
some stations.
Unit switches off
after 20 minutes of
inactivity.
130 x 186.5 x 125 mm
3.0kg(Approximate)
Reason(s)
Power cable not
connected to wall
socket. Power socket is
not switched on.
Volume is too low. AUX
source volume is too
low.
Volume is too high. AUX
source volume is too
high.
No disc in the tray.
Disc not loaded
properly.
Disc is dirty.
Poor reception
Weak signal
Station not available in
your area.
DAB+ not available in
your area.
Weak signal.
Auto standby mode in
operation.
17
Solution(s)
Make sure the plug is
connected.
Switch the power on.
Increase the volume.
Increase the output volume
of the AUX source.
Reduce the volume. Reduce
the output volume of the
AUX source.
Insert a compatible disc.
Check the disc loaded.
Clean the disc.
Re-locate the antenna (FM).
Use the manual tune
function.
See DAB+ availability
website:
http://www.getdigital
radio.com/
Try re-positioning the aeria
(earphones).
This unit is designed to
enter STANDBY mode
automatically after 20