Mitsubishi Electric G-50A Instruction Book page 35

( 2 ) Group name copy
• A certain group name can be copied to another group.
( This method use the "M" (memory) and "MR" (memory read) functions.)
• It is convenient to use a group name for other groups because a group name that was copied can also be cor-
rected.
1
GROUP
Press the
SELECT
name setting screen.
2
Press the
3
Press the ENTER switch one time to record the setting name in memory.
4
"M" is displayed in reverse with blinking.
Recording the setting name to memory is completed.
5
GROUP
Press the
SELECT
6 Press the
ENTER
7
Press the switch to read in memory.
8
Preformed the memory read for the group name.
Refer to section " (1) setting method (page 31)" and perform the cor-
rection of the group name.
-33-
switch to display the original group on the group
switch to move the cursor to "M" .
switch to select the copy destination group.
switch to move the cursor "MR" .