Mitsubishi Electric G-50A Instruction Book page 24

(4) Copying schedule content to other groups
• The schedule pattern P1 to P3, weekly schedule pattern, set-back value or setting temperature of one group
can be recorded and copied to memory or to another desired group.
• Correction and modification can be easily performed after the copy operation is completed.
3 /
Press the
5 8
P4 or ( - ).
4 Press the ENTER switch one time to complete the setting.(The cursor
will move to the next setting position. )
5
Repeat operations
3
day.
NOTE:
When the No.4 function setting is set ON, P4 cannot be set.
(memory,memory read)
1 Display the original group on the weekly schedule setting screen.
2
Press the
3 Press the switch one time to record the setting date in memory.
ENTER
*To erase date from the memory, return to the user operation menu
screen.
4
"M" is displayed in reverse with blinking.
5 Press the GROUP
SELECT
to be copied.
6 Press the
7 Press the ENTER switch to set the contents which will be the same as the
setting data in memory.
The same contents are displayed.
The contents stored in memory can be copied to other groups any number
of times because these contents will not be erased even if the memory read
operation is used.
-22-
(CLOCK/PATTERN) switch to select P1 to
and to assign the schedule pattern to each
4
switch to move the cursor to "M" .
switch to select the group to which the data is
switch to move the cursor to "MR" .