KTM 1190 RC8 R Owner's Manual page 184

13 WHEELS, TIRES
–
Position the brake calipers and check that the brake linings are seated correctly.
–
Mount screws
–
Operate the hand brake lever repeatedly until the brake linings are in contact with the
brake disc and there is a pressure point. Fixate the hand brake lever while it is actu-
ated.
The brake calipers align themselves.
–
Tighten screws
Guideline
C00334-11
Screw, front brake caliper
–
Release the fixation of the hand brake lever.
–
Take the motorcycle off of the front wheel stand. (
–
Remove the rear of the motorcycle from the lifting gear. (
–
Pull the front brake and compress the fork powerfully a few times.
The fork legs straighten.
–
Fully tighten screws
Guideline
Fork end pinch bolts
B01403-10

on both brake calipers but do not tighten yet.

on both brake calipers.
M10x1.25

.
45 Nm Loctite
(33.2 lbf ft)
p. 157)
p. 156)
M8 15 Nm
(11.1 lbf ft)
182
® 243™