Advertisement
F E ATURE SETUP
Set the time and date displayed on
handset screen
If you subscribe to Caller ID service, the date and time will
be set automatically with the first incoming call.
If you do not have Caller ID service, you can set the date
and time manually.
•
Press
, then press
displayed. Press
•
The month is flashing. Use
current month. Press
•
The day is flashing. Use
correct day. Press
•
The hour is flashing. Use
current hour. Press
•
The minute is flashing. Use
correct minute. Press
•
or
is flashing. Use
between
and
Set the phone for tone or pulse
dialing (base only)
•
Press
on base.
•
Press
or
until
setting is displayed,then press
•
Use
or
to select the correct setting.
•
Press
to save the setting.
Set the language
•
Press
on the base or
handset.
•
Press
or
until
•
Press
, the current setting is flashing.
•
Use
or
to select
.
•
Press
to save the setting.
© 2003 Advanced American Telephones.
All Rights Reserved.
AT&T and the Globe Design are
trademarks of AT&T Corp., licensed to
Advanced American Telephones.
Printed in China. Issue 1AT&T 05/03
until
.
or
to select the
.
or
to select the
.
or
to select the
.
or
to select the
.
or
to choose
. Press
.
and the current
.
on the
is displayed.
,
or
Answering System
P ress
to turn the system on or off. When the system is on,
you will hear "Machine on" and the ON/OFF light will be lit.
If you turn the system on at the first time, it works using the default
setting and pre - re c o rded outgoing announcements. For details on
re c o rding your own outgoing announcements and changing system
s e t t i n g s , see "ANSWERING SYSTEM OPERATION
is
ing on page 24 of your User's Manu a l .
Set the Clock
1
Make sure the answering system is on.
2
Press
setting then announces:"To change clock, press
3
Press
4
Press
correct day, then press
5
Press
correct hour, then press
6
Press
correct minutes,then press
7
Press
correct years,then press
announces the current clock setting.
¥
NOTE: You can choose to set the day and time
manually, or you can allow it to be set automatically with
incoming Caller ID Information.
¥
NOTE: Press and hold
or the year by 10.
¥
NOTE: The selection of the year is from 2000 to 2039.
Record Your Announcement
¥
NOTE: For complete details about recording
announcements, see "Record Your Announcement"
in the ANSWERING SYSTEM OPERATION section of
your User's Manual.
1
With the system set for the desired answer mode
(normal or Announce Only) press
hear "Change announcement."
2
Press
followed by a beep, speak toward the
base to record an nnouncement up
to 90 seconds long.
3
Press any MAILBOX/STOP button to
stop recording. The system plays
back your recorded message.
.The system announces the clock
."
.
until the system announces the
.
until the system announces the
.
until the system announces the
until the system announces the
. The system
to advance the minute
. After you hear " N ow re c o rd i n g "
" start-
AT T H E BA S E
.
until you
Advertisement
