Page 2
ATT-1445QSG-d02jan12ok.qxd 2/13/1950 7:21 PM Page 2 Installation and setup Connect the base and install batteries as shown below. After installation, place the handset in the base and allow the battery to charge for 12 hours before use. You can keep the battery charged by returning the handset to the base after each use. NOTE: Use only the NOTE: For wall mount- ing, please see page 8 in your...
Page 3
ATT-1445QSG-d02jan12ok.qxd 2/13/1950 7:21 PM Page 3 Quick reference guide Incoming calls Handset NEW 00 OLD 27 8/12 10:06 Low battery Date and time Select Hold Press to store a programming Press to place a call on hold. Press option, or to store a directory again to resume your call.
ATT-1445QSG-d02jan12ok.qxd 2/13/1950 7:21 PM Page 4 Quick reference guide Telephone Base ANTENNA Swivel fully upright for best results. PAGE/ HANDSET LOCATOR Press to locate hand- set if lost. MESSAGE IN USE/CHARGING Flashes when you have new voice Steady: Handset battery is charging. mail (requires voice mail service from Flashing: Phone is in use, or call is on your local telephone company).