Suzuki JR50 Owner's Manual page 33

10.Adjust the side stand in order
to maintain the correct parking
lean angle. Remove screw 2
and extend inner stand 1 so
that the higher clearance hole
is visible through the outer
stand screw hole. Reinstall
and securely tighten screw 2.
WARNING
Failure to adjust the seat
height properly could lead to
an accident.
Follow the following instruc-
tions to avoid an accident:
• Adjust the front fork and rear
shock absorbers at the same
time.
• Check the free travel of the
rear brake pedal after height
adjustment procedures are
complete. Adjust rear brake
pedal free travel if necessary.
• Adjust the side stand in order
to maintain the correct park-
ing lean angle.
• Bolts and nuts must be
torqued to the proper specifi-
cations. We strongly recom-
mend that this be done by
your authorized
dealer or qualified mechanic.
Tightening torque:
Front fork upper
bolts
Front fork lower
clamp bolts
Rear shock
absorber upper
bolts
Rear shock
absorber lower
bolts
3-15
Suzuki
25 N·m
(2.5 kgf-m, 18.0 lb-ft)
15 N·m
(1.5 kgf-m, 11.0 lb-ft)
25 N·m
(2.5 kgf-m, 18.0 lb-ft)
8 N·m
(0.8 kgf-m, 5.5 lb-ft)