Suzuki JR50 Owner's Manual page 30

4. Remove the bolt securing the
muffler at the center of the
machine. This bolt needs a 12-
mm T type wrench.
5. Using a 12-mm T type wrench
and a 12-mm wrench, remove
the bolt securing second muf-
fler.
6. Remove the muffler. Remove
the power reduction plate from
exhaust pipe flange. This plate
is positioned inside the flanged
end.
7. Reinstall the muffler, making
sure that the exhaust pipe gas-
ket is
(Replace the gasket as neces-
sary.)
3-12
in good condition.