Suzuki JR50 Owner's Manual page 32

NOTE: The spacers and longer
bolts are provided in the tool bag.
5. Tighten the upper and lower
bolts securely in that order.
6. Reinstall the number plate.
7. Remove the frame cover and
loosen the upper rear shock
absorber bolt. Do this on right
and left sides.
Rubber cap and mounting boss
8. Remove the lower rear shock
absorber bolt. After taking off
the rubber cap from the higher
boss, set the shock absorber
on it. Tighten the upper and
lower mounting bolts securely.
Do this on both sides.
WARNING
Failure to cover the rear shock
mounting boss with the cap
can cause injury to the rider.
Fit the cap to the lower mount-
ing boss of the rear shock.
9. Reinstall the frame covers.
3-14