Drop - AT&T Merlin 1030 User Manual

If you don't want a participant to listen as you set up the rest of
the conference call, touch Hold before repeating this procedure.
To take the person off hold:
Touch Conference.
Touch the button for the line you put on hold.
If you have several lines on hold, repeat this procedure for each
one.
To remove yourself from a conference call without ending the
call:
Touch Hold.
To rejoin the call:
Touch a button associated with a line active in the call.

Drop

To disconnect a busy or unanswered line when you're trying to
set up a conference call, or to disconnect one person at a time
from a conference call:
Touch Drop.
Touch the button of the line to disconnect.
If you're setting up a conference call, remember to touch Con-
ference again before trying to add another call to the
conference.
NOTE: You must use the Drop feature when you want to discon-
nect one person from a conference call. If you press the switch-
hook, you end the call.
Conference
+
Hold
Pause
555-1234
Drop
+
Stop
555-1234
555-1234
12