Planet NVR-820 User Manual page 65

FTP notification
To add an FTP server,
1. Start by giving a name to the server that you are adding to the recorder
2. Enter the hostname or the IP address of the FTP server
3. Enter the communication port of the FTP server (usually port 21)
4. Enter the username and password of the FTP server if it's required
5. Check "Use Passive Mode" if it's required or leaves it unchecked to use active mode
6. Click "Test" to verify if all information is entered correctly and the connection to the FTP
server can be established successfully
7. Click "Add" for the settings to take effect
Event Actions
Define how the notifications will be sent and where they will be sent.
Event trigger may not work for cameras that are placed outside of your local
network or on the Internet until the "UPnP Port Forwarding" is enabled in
both the NVR and the router.
Network Video Recorder with HDMI
NVR-820 / NVR-1620
65