Planet NVR-820 User Manual page 14

Buttons Status
ON
Power
OFF
Restore
Reset default
Restart
Buzzer
STOP
Stop
Buzzer Status
Complete
start
Initiating
Beep
restart
Initiating
shutdown
Rear Panel
Connector Description
Ethernet 10 / 100 / 1000Mbps network.
USB Connect your USB flash disk for firmware upgrade and backup.
Video VGA / HDMI
Audio Line in / Line out / Mic
Power Supply 100~240V AC, 1.4A / Max. 50 / 60Hz
Network Video Recorder with HDMI
buzzer stop button is pressed (if buzzer is triggered)
Definitions
Press and hold for 2 seconds
Press and hold for 2 seconds
Press and hold for 5 seconds
Press and hold for 2 seconds
Press and release to stop buzzer right away
Definitions
Beep once (indicating the system is fully started)
Beep once (Indicating the restart process has begun)
Beep once (Indicating users to release the Power button
as the shutdown process has begun)
14
NVR-820 / NVR-1620