Pioneer DJM-2000 Service Manual page 29

5
2. Types of Confirmation Mode
Page Item Name
00 VERSION
01 Device Test
02 LED ALL ON
03 LED ALL OFF
04 KEY TEST(1)
05 KEY TEST(2)
06 KEY TEST(3)
07 SWITCH TEST(1)
08 SWITCH TEST(2)
09 VOLUME TEST (1)
10 VOLUME TEST (2)
11 VOLUME TEST (3)
12 VOLUME TEST (4)
13 METER TEST
14 TOUCH PANEL TEST(1)
15 TOUCH PANEL TEST(2)
16 MAIN PANEL TEST
17 SUB PANEL TEST
18 MAIN PANEL TEST
19 SUB PANEL TEST
20 MAIN PANEL TEST
21 SUB PANEL TEST
22 MAIN PANEL TEST
23 SUB PANEL TEST
24 MAIN PANEL TEST
25 SUB PANEL TEST
26 MAIN PANEL TEST
27 SUB PANEL TEST
5
6
Mode Contents
Mode for displaying the version of the firmware.
Mode for displaying the device information.
Mode for lighting all the LEDs and FL segments.
Mode for extinguishing all the LEDs and FL segments.
Mode for indicating a pressed key.
Mode for indicating a pressed key.
Mode for indicating a pressed key.
Mode for indicating the setting position of a switch.
Mode for indicating the setting position of a switch.
Mode for indicating the level of a volume control.
Mode for indicating the level of a volume control.
Mode for indicating the level of a volume control.
Mode for indicating the level of a volume control.
Mode for confirming lighting of the meter LEDs, one LED at a time.
Calibration.
Mode for displaying the coordinate positions for the touch panel.
Confirmation of the display colors for the main panel (color bars).
Confirmation of the display colors for the subpanel (color bars).
Confirmation of defective pixels (white) on the main panel.
Confirmation of defective pixels (white) on the subpanel.
Confirmation of defective pixels (black) on the main panel.
Confirmation of defective pixels (black) on the subpanel.
Confirmation of defective pixels (red) on the main panel.
Confirmation of defective pixels (red) on the subpanel.
Confirmation of defective pixels (green) on the main panel.
Confirmation of defective pixels (green) on the subpanel.
Confirmation of defective pixels (blue) on the main panel.
Confirmation of defective pixels (blue) on the subpanel.
DJM-2000
6
7
Purpose
Version confirmation of the firmware.
Confirmation of the LAN connection state.
Operation check of the LED and FL.
Operation check of each key.
Operation check of each switch.
Operation check of each volume.
Operation check of meter LED.
Calibration adjustment of the touch panel.
Operation check of the touch panel.
Operation check of the LCD.
7
8
A
B
C
D
E
F
29
8