Biostar M6VCG User Manual page 80

Chapter 4
$,  !  + : !  &" * - &A & ) &A % ! ! '
  +* -!   
 ( .

No power to monitor.
'!! +! !B5)  & , +  C B(;  C
 ( .

Incorrect information
entered into the
configuration (setup)
program.
!"#$
 2(
All or part of the system
may be inoperable. The
new card may work but a
mouse or COM port may
not work.
!"#$
 2(
Check the configuration
program. Replace any
incorrect information.
4-5
Trouble Shooting
(./(2
Change the interrupt or
RAM address on the new
expansion card. See the
documentation that came
with the new card in order
to change pin settings.
Many expansion devices
come with proprietary
software that will assist
you in doing this.
(./(2
Review system's
equipment . Make sure
correct information is in
setup.