Biostar M6VCG User Manual page 78

Chapter 4
 ! '& ! = , ' && !-& )A == &, ', & !-& )
 ( .

Connector between hard
drive and system board
unplugged.
Damaged Hard Disk or
Disk Controller.
Hard Disk directory or
FAT is scrambled.
 ! '  = !, ', 8 !-2 && !- = & &   ! 
= !&= = +, '2 &8 !- ! ' !! =
 ( .

Hard Disk boot program
has been destroyed.
!"#$
 2(
When attempting to run
the FDISK utility described
in the HARD DISK section
of this manual you get a
message, INVALID
DRIVE SPECIFICATION.
Format hard disk; if
unable to do so the hard
disk may be defective.
Run the FDISK program,
format the hard drive (see
HARD DRIVE section of
manual). Copy data that
was backed up onto Hard
Drive.
!"#$
 2(
A number of causes could
be behind this.
4-3
Trouble Shooting
(./(2
Check cable running from
disk to disk controller
board. Make sure both
ends are securely plugged
in; check the drive type in
the Standard CMOS
Setup (see HARD DISK
section of this manual).
Contact Technical
Support.
Backing up the hard drive
is extremely important. All
Hard Disk are capable of
breaking down at any
time.
(./(2
Back up data and
applications files.
Reformat the Hard Drive
as described in the Hard
Drive section of this
manual. Re-install
applications and data
using backup disks.