Minolta Dynax 800si Instruction Manual page 56

DATA MEMORY
SELECTING DATA MEMORY
Press the shutter-release button partway down to enter
the selection.
• will appear in the data panel when data-memory is on.
Turn data memory OFF using the steps above, turn either control dial
until appears in the data panel in step 2.
CONFIRMING THE DATA AREA
Press the data-memory button at anytime to see
in which data area information is being
recorded.
Example: F3 indicates you are now recording in
film area 3.
108
Press the data-memory button
in the control panel.
Turn either control dial until
appears in the data panel.
• The film area where the data is to
be stored will appear in the bottom
right corner.
DATA RECALL
Continue turning the dial until the number
for the desired data area appears.
Press the data-memory button
in the control panel.
Turn either control dial until
appears in the data
panel.
Press the adjust button.
• The display in the data panel shows
the aperture and shutter speed
information for the first frame.
blinks in the data panel.
Continued on next page.
109