Minolta Dynax 800si Instruction Manual page 52

MEMORY
STORING SETTINGS IN MEMORY
Set the camera with all the function setting you want to
save (see chart on the previous page).
• Saving a new set of functions in a memory number that already has
settings stored will replace the old settings with the new.
• The memory settings are not affected by turning the camera off or
removing the batteries.
• When settings are stored or recalled in memory, shutter speed,
aperture, exposure compensation values, and flash compensation
values do not appear in the data panel, but are set in memory.
Clear all three sets of memory settings by pressing and holding the
enter button while turning the camera off, then on again.
100
Assign the group a number by
turning the memory-number
lever to the desired number.
Press the Enter button in the
control panel.
• will briefly appear in the
data panel.
RECALLING CAMERA SETTINGS IN MEMORY
Turn the memory-number
lever to the desired number.
Press the memory-recall
button.
101