Minolta Dynax 800si Instruction Manual page 14

REWINDING THE FILM
After you have exposed the last frame, the camera will automatically
rewind the film silently. When the film is completely rewound, the
motor will stop and will blink in the data panel, indicating it is safe
to open the back cover.
MANUAL REWIND
Use manual rewind to rewind the film before the roll is finished.
Customized Function #12 - Film Rewind Speed
The camera is set for slow/silent rewind when shipped. This can be
changed to high-speed rewind with the customize function.
High-speed rewind setting takes about 8 seconds to rewind a 24-
exposure roll of film. See page 102.
Customized Function #2 - Film Rewind Start
Automatic rewind start (the default setting) will rewind the film when it
reaches the end of the roll (or exposure 36 in non-DX-coded film).
Change the setting to Manual rewind start if desired.
24
Wait until rewind is complete.
Slide the back-cover release
down to pop open the back
cover.
Press the rewind button.
• To rewind the film in high-speed,
press the rewind button twice.
FOCUS
BASICS
25