Safety Symbol Guide - CO/Tech Z1J-TD10-13E-UK Original Instructions Manual

e) Maintenance of electrical hand tools. Check if something is incorrectly set, if
movable parts are getting jammed, or parts are broken or something else that
might cause dysfunction to the electrical hand tool. If something is damaged it
must be repaired before use. Many accidents are caused by poorly maintained
electrical hand tools.
f) Keep the tools sharp and clean. Properly maintained cutting tools with sharp
blades are less disposed to getting jammed and easier to control.
g) Use the electrical hand tool, accessories and such according to the instructions
and in a way suitable for the type of electrical hand tool used. Using the electrical
hand tool for work other then suitable work could result
in a dangerous situation.
5) Service
a) Repairs and service should only be performed by qualified persons, and only with
original spare parts. This guarantees the safety on the electrical hand tool.
Specific Safety Regulations for hammer drills
1. Ear defenders should be worn when using the hammer drill. Exposure to high
levels of noise can cause hearing impairment.
2. Use the supplied side handle when using the hammer drill. Losing control of
the hammer drill can cause serious personal injury.

Safety symbol guide

Read the entire instruction manual.
Always use ear defenders and safety goggles or a visor.
4