Assembly Instructions; Operating Instructions - Kärcher K 2.300 Operator's Manual

ASSEMBLY INSTRUCTIONS

Required tools
Screwdriver, small size (not supplied)
for connecting high pressure hose and
trigger gun.
Assembly
STEP 1:

Insert wheels into the body of the unit.
STEP 2:

Slide the transport handle into place.
STEP 3:

Install the supplied connector to the
unit's water inlet.
Note: Never attach the garden hose
connector to the unit's water inlet!
6 English
STEP 4:

Fasten the quick connect to the high
pressure outlet.
STEP 5:

Insert one end of the high pressure
hose into the trigger gun until it locks
audibly.
Note: Make sure the connection nip-
ple is aligned correctly. Check the
connection by pulling on the high
pressure hose.
Check the secure connection by pull-
ing on the high pressure hose.
Disconnect:
Press the disconnect key on the trig-

ger gun and remove the high pres-
sure hose from the trigger gun.
OPERATING
INSTRUCTIONS
STEP 1:

Insert one end of the high pressure
hose tightly into the quick connect on
the unit, it will lock in audibly.
Note: Make sure the connection nip-
ple is aligned correctly. Check the
connection by pulling on the high
pressure hose.
Check the secure connection by pull-
ing on the high pressure hose.