Introduction For Buttons On Remote Controller - York YEHJZH009-24BAM1ABX User Manual

Introduction for buttons on remote controller

Note:
After putting through the power, the air conditioner will give out a sound.
Operation indictor "
conditioner by using remote controller.
Under on status, pressing the button on the remote controller, the signal icon "
on the display of remote controller will blink once and the air conditioner will give
out a "de" sound, which means the signal has been sent to the air conditioner.
ff status, set temperature and clock icon will be displayed on the display
of remote controller (If timer on, timer off and light functions are set, the corre-
sponding icons will be displayed on the display of remote controller at the same
time); Under on status, the display will show the corresponding set function icons.
1
ON/OFF button
Press this button, the unit will be turned on, press it once more, the unit will be turn-
ed off. Sleep function will be canceled, while unit off.
2
FAN button
Press this button, Auto, Low, Medium-low, Medium, Medium-high, High speed can
be circularly selected. After powered on, Auto fan speed is default. Under DRY
mode, Low fan speed only can be set up.
Low fan Medium-low fan
Note: If matching with smart zone controller for operation, under auto fan speed, the
fan speed display on smart zone controller will always be maintained at "auto high fan".
3
MODE button
Press this button, Auto, Cool, Dry, Fan, Heat mode can be selected circularly. Auto
mode is default while power on. Under Auto mode, the temperature will not be dis-
played; Under Heat mode, the initial value is 28 (82 ); Under other modes, the
initial value is 25 (77 ).
(only for cooling and heating unit. As for cooling only unit, it won't have any action
when it receives the signal of heating operation.)
4
+/- button
Presetting temperature can be increased. Press this button, the temperature can be
set up, continuously press this button and hold for two seconds, the relative contents
can quickly change, until unhold this button and send the order that the
will be displayed all the time. The temperature adjustment is unavailable under the
Auto mode, but the order can be sent if pressing this button. Temperature of Celsius
degree setting: 16-30; for Fahrenheit degree setting: 61-86.
" is ON (red indicator). After that, you can operate the air
ATUO
Medium fan Medium-high fan High fan
8
Note: It's Low fan speed
under Dry mode.
AUTO COOL
FAN HEAT
( ) signal
"
DRY