System Configuration; Network - Polycom DMA 7000 Operation Manual

System Configuration

Network

Polycom, Inc.
This chapter describes the following Polycom
Application™ (DMA™) 7000 system configuration topics:
• Network
• System Time
• License
• Signaling Configuration
• Logging Configuration
• History Record Retention
• CMA Integration
• System Configuration Procedures
If you're performing the initial configuration of your Polycom DMA system,
study Chapter 2, "Polycom
before you continue.
The following table describes the fields on the Network page. These values are
normally set in the USB Configuration Utility during system installation and
rarely need to be changed. See the Getting Started Guide.
Caution
Changing network settings requires a system restart and terminates all active
conferences.
If the system is using a CA-provided identity certificate, changing some network
settings (host names and IP addresses) also requires you to update the certificate.
(if the system is using a self-signed certificate, an updated one is automatically
created.)
You can't change the system's network settings while it's integrated with a Polycom
CMA system. The integration must first be terminated. See
page 49.
®
Distributed Media
® DMA ™ System Initial Configuration Summary,"
4
"CMA Integration" on
41