Seat Belt Maintenance - Acura TL 2012 Owner's Manual

Hide thumbs Also See for TL 2012:
Table of Contents

Advertisement

Seat Belt Maintenance

For safety, you should check the
condition of your seat belts regularly.
Pull each belt out fully, and look for
frays, cuts, burns, and wear. Check
that the latches work smoothly and
the belts retract easily. If a belt does
not retract easily, cleaning the belt
may correct the problem (see page
564
). Any belt that is not in good
condition or working properly
will not provide good protection
and should be replaced as soon
as possible.
Acura provides a limited warranty on
seat belts. See your
Acura Warranty
booklet for details.
Information
Additional Information About Your Seat Belts
If a seat belt is worn during a crash,
you should have your dealer inspect
the belt, and replace it if necessary.
A belt that has been worn during a
crash may not provide the same level
of protection in a subsequent crash.
The dealer should also inspect the
anchors for damage and replace
them if needed. If the automatic seat
belt tensioners activate during a
crash, they must be replaced.
I n f o r ma t i o n P r o v i d e d b y :
2012 TL
Not checking or maintaining
seat belts can result in serious
injury or death if the seat belts
do not work properly when
needed.
Check your seat belts regularly
and have any problem
corrected as soon as possible.
23

Advertisement

Table of Contents
loading

Table of Contents