Seat Belt Maintenance - Acura 2004 NSX Owner's Manual

Main Menu
Table of Contents
The tensioners are designed to
activate primarily in frontal collisions,
and they should activate in any
collision severe enough to cause
airbag inflation.
However, the tensioners can be
activated during a collision in which
the airbags do not deploy. In this
case, the airbags would not be
needed, but the additional restraint
could be helpful.
When the tensioners are activated,
the seat belts will remain tight until
they are unbuckled in the normal
manner.
Additional Information About Your Seat Belts

Seat Belt Maintenance

For safety, you should check the
condition of your seat belts regularly.
Pull each belt out fully and look for
frays, cuts, burns, and wear. Check
that the latches work smoothly and
the belts retract easily. Any belt that
is not in good condition or working
properly will not provide good
protection and should be replaced as
soon as possible.
Acura provides a lifetime warranty
on seat belts for U.S. models. See
your Acura Warranty Information
booklet for details.
If a seat belt is worn during a crash,
it must be replaced by the dealer. A
belt that has been worn during a
crash may not provide the same level
of protection in a subsequent crash.
The dealer should also inspect the
anchors for damage and replace
them if needed. If automatic seat belt
tensioners activate during a crash,
they must be replaced.
For information on how to clean your
seat belts, see page 157 .
Not checking or maintaining
seat belts can result in serious
injury or death if the seat belts
do not work properly when
needed.
Check your seat belts regularly
and have any problem
corrected as soon as possible.
Driver and Passenger Safety
17