Acura TL 2012 Owner's Manual page 605

Hide thumbs Also See for TL 2012:

Table of Contents

Checking and Replacing Fuses

If something electrical in your

vehicle stops working, the first thing

you should check for is a blown fuse.

Determine from the chart on pages

, or the diagram on

the fuse box lid or the fuse label,

which fuse or fuses control that

component. Check those fuses first,

but check all the fuses before

deciding that a blown fuse is not the

cause. Replace any blown fuses and

check if the device works.

Turn the ignition switch to the

LOCK (0) position.

Make sure the headlights and all

other accessories are off.

Models equipped with the keyless access

system have an engine start/stop button

instead of an ignition switch. VEHICLE OFF

(LOCK) Mode is the equivalent of LOCK (0).

For more information, see pages

I n f o r ma t i o n P r o v i d e d b y :

Remove the cover from the fuse

Check each of the large fuses in

the under-hood fuse box by

looking at the wire inside.

Removing these fuses requires a

Phillips-head screwdriver.

Chapters

Table of Contents