Driving Position Memory System - Acura TL 2012 Owner's Manual

Driving Position Memory System

Your vehicle has a memory feature
for the driver's seat and outside
mirror positions.
Seat, except for power lumbar, and
outside mirror positions can be
stored in separate memories. You
select a memorized position by
pushing the appropriate button or
using the appropriate remote
transmitter or the keyless access
remote (Driver 1 or Driver 2).
170
Storing a Driving Position in
Memory
Store a driving position only when
the vehicle is parked.
1. Turn the ignition switch to the
ON (II) position. You cannot add a
new driving position to the
memory unless the ignition switch
is in the ON (II) position. You can
recall a memorized position with
the ignition switch in any position.
Adjust the seat to a comfortable
2.
position (see page 161
Adjust the outside mirrors for best
visibility (see page
168
I n f o r ma t i o n P r o v i d e d b y :
2012 TL
＊
SET BUTTON
Press and release the SET button
3.
on the control panel. You will hear
).
a beep. Immediately press and
hold one of the memory buttons (1
).
or 2) until you hear two beeps.
The indicator in the memory
button will come on. The current
positions of the driver's seat and
outside mirrors are now stored.
＊ : Models equipped with the keyless access
system have an engine start/stop button
instead of an ignition switch. ON Mode
is the equivalent of ON (II). For more
information, see pages
MEMORY BUTTONS
184 and 187.