Low Oil Pressure Indicator - Acura TL 2012 Owner's Manual

Hide thumbs Also See for TL 2012:
Table of Contents

Advertisement

This indicator should never
come on when the engine is
running. If it starts flashing or stays
on, the oil pressure has dropped very
low or lost pressure. Serious engine
damage is possible, and you should
take immediate action.
You will also see a ''CHECK
ENGINE OIL LEVEL'' message on
the multi-information display when
this indicator comes on.
The indicator notifies you of low oil
pressure and does not measure the
oil level. Check your vehicle's oil
level at each refueling.
Running the engine with low oil
pressure can cause serious mechanical
damage almost immediately. Turn of f
the engine as soon as you can saf ely get
the vehicle stopped.
1.
Safely pull off the road and shut
off the engine. Turn on the hazard
warning lights.
2.
Let the vehicle sit for a minute.
Open the hood, and check the oil
level (see page
474
). An engine
very low on oil can lose pressure
during cornering and other driving
maneuvers.
3.
If necessary, add oil to bring the
level back to the full mark on the
dipstick (see page
543
I n f o r ma t i o n P r o v i d e d b y :
2012 TL

Low Oil Pressure Indicator

4.
Start the engine, and watch the oil
pressure indicator. If it does not go
out within 10 seconds, turn off the
engine. There is a mechanical
problem that needs to be repaired
before you can continue driving
(see
Emergency Towing
page
607
).
on
).
595

Advertisement

Table of Contents
loading

Table of Contents