Using A Bluetooth Wireless Headset (Optional) For Landline Calls - Panasonic KX-TGL460 Operating Instructions Manual

Using a Bluetooth wireless
headset (optional) for
landline calls
By pairing a Bluetooth headset to the base
unit, you can have a hands-free conversation
wirelessly for landline calls.
Important:
R Your Bluetooth wireless headset must
support the HeadSet Profile (HSP)
specification.
R 1 headset can be paired to the base unit.
R Only 2 Bluetooth devices can be used with
the unit at the same time (for example, 2
cellular lines, or the headset and 1 cellular
line).
R For best performance, we recommend
using a Bluetooth headset within 1 m
(3.3 feet) of the base unit. A headset can
communicate with the base unit within a
range of approximately 10 m (33 feet).
Pairing a headset to the base unit
Important:
R Make sure that the Bluetooth headset is not
connected to any other Bluetooth device.
1
Your headset:
Set your headset to pairing mode.
R Refer to the headset operating
instructions.
2
Handset:
MMENUN#621
3
If your headset PIN is "0000", go to
step 4.
If your headset PIN is other than
"0000", press MCLEARN, then enter your
headset PIN.
R Typically, default PIN is "0000". Refer
to the headset operating instructions.
4
Press MOKN, then wait until a long beep
sounds.
5
MOFFN
R When the HEADSET indicator on the
base unit lights up, you are ready to
use the headset.
For assistance, please visit http://shop.panasonic.com/support
TGL46x(en)_1118_ver044.pdf
Connecting/disconnecting a headset
If you cannot connect the headset and base
unit using the headset, you can connect using
the handset.
To use your headset with another Bluetooth
device such as a cellular phone, you may
need to disconnect it from the base unit.
Important:
R Make sure that the headset is turned on.
1
2
Unpairing a headset
You can cancel a pairing of the headset that is
stored to the base unit.
1
2
3
Operating a Bluetooth wireless
headset using a landline
Important:
R Refer to your headset operating instructions
Answering landline calls with your
headset
To answer a landline call, press your
headset's button referring to your headset
operating instructions.
When you finish talking, press your headset's
button referring to your headset operating
instructions.
Note:
R If you cannot hang up the call using your
51
Using Bluetooth® Devices
To connect/disconnect:
MMENUN#622
R A long beep sounds.
MOFFN
MMENUN#612
MbN: "Yes" a MSELECTN
R When the headset is unpaired, the
HEADSET indicator is turned off.
MOFFN
for headset operations.
headset, press M N (STOP) on the base
unit.
2015/11/18 9:33:32
51