Mounting; Orientation; Rigging - Chauvet Hurricane Haze 1D User Manual

Mounting

Orientation

The Hurricane Haze 1D may be mounted in any position provided there is
adequate room for ventilation around it.

Rigging

Be sure that the structure or surface onto which you are mounting this product can
support its weight. Please see the Technical Specifications section of this manual
for weight information.
Make sure to mount the product securely to a rigging point, whether an elevated
platform or a truss.
When rigging this product onto a truss, you should use a mounting clamp of
appropriate weight capacity. The bracket has a 13 mm hole, which is appropriate
for this purpose.
When mounting this product overhead, always use a safety cable.
Before deciding on a location for this product, always make sure that it will be easy
to access the unit for maintenance and programming purposes.
When power linking multiple products, you must always consider the length of the
power linking cable and mount the products close enough for the cable to reach
them.
The bracket knobs allow for directional adjustment when aiming the product to the
desired angle. Only loosen or tighten the bracket knobs using your bare hands.
Using tools could damage the knobs.
Mounting Clamp
Safety Cable
Mounting Diagram
Rubber Feet
Page 8 of 16 Hurricane Haze 1D User Manual Rev. 1