Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Chauvet Geyser RGB
Summary of Contents for Chauvet Geyser RGB
- Page 1 User Manual...
-
Page 2: Table Of Contents
ABLE OF ONTENTS 1. Before You Begin ......................3 What Is Included ......................... 3 Unpacking Instructions ........................ 3 Claims ..............................3 Text Conventions ........................3 Symbols ............................3 Disclaimer ........................... 3 Product at a Glance ........................4 Safety Notes ..........................4 2. -
Page 3: Before You Begin
Failure to report damage to the carrier immediately may invalidate your claim. In addition, keep the box and contents for inspection. For other issues, such as missing components or parts, damage not related to shipping, or concealed damage, file a claim with CHAUVET® within 7 days of delivery. Text Convention... -
Page 4: Product At A Glance
Keep this User Manual for future use. If you sell the product to another user, be sure to give this document to the next owner. • Fog Cleaner Quart (FCQ) was specifically developed by CHAUVET® to clean your Geyser™ RGB. Make sure you use FCQ regularly to increase the life of your fogger. Page 4 of 14... -
Page 5: Introduction
2. I NTRODUCTION Overview Nozzle and LEDs Alternate 3-pin DMX Fluid Tank Safety Eye Loop On/Off Switch In/Out Attachment Point LED Display Handles Power In Safety Eye Safety Cable Loop 5-pin DMX Attachment Point In/Out (Underside) Fuse Holder Remote Control Receiver Port Geyser™... -
Page 6: Dimensions
Dimensions Page 6 of 14 Geyser™ RGB User Manual (Rev. 1) -
Page 7: Setup
3. S ETUP AC Power The Geyser™ RGB has a fixed voltage power supply and it can work with an input voltage of either 120 V, 60 Hz or 230 V, 50 Hz, depending on the specific model. To determine the product’s power requirements (circuit breaker, power outlet, and wiring), use the current value listed on the label affixed to the product’s panel, or refer to the product’s specifications chart. -
Page 8: Mounting
Mounting Before mounting the product, read and follow the safety recommendations indicated in the Safety Notes. Orientation The Geyser™ RGB may be mounted in an overhead mounting/downward fog jet, floor mounting/vertical fog jet, or floor mounting/horizontal fog jet. For best results, remove the fluid tank from the holder and set it upright on an adjacent surface when mounting the Geyser™... -
Page 9: Operation
4. O PERATION Control Panel To access the control panel functions, use the four buttons located underneath the display. Operation Button Function <MENU> Selects an operation mode or to backs out of the current menu option (<UP>) Scrolls up the list of options or selects a higher value (<DOWN>) Scrolls down the list of options or selects a lower value <ENTER>... -
Page 10: Dmx Channel Modes, Assignments, And Values
DMX Channel Modes, Assignments, and Values Channel Function Value Setting 8-Channel 000 009 No function 010 255 Fog on 000 009 No function 010 255 0~100% 000 009 No function Green 010 255 0~100% 000 ... -
Page 11: Configuration (Standalone)
Configuration Set the product to Automatic mode to control without a DMX controller. Connect the product to a suitable power outlet. (Standalone) Turn the product on. Never connect a product that is operating in any standalone mode to a DMX string connected to a DMX controller. -
Page 12: Technical Information
Cleaning is now complete. Refill with fog fluid. Run the machine briefly to clear any cleaning solution from the pump and heater. • Fog Cleaner Quart (FCQ) was specifically developed by CHAUVET® to clean your Geyser™ RGB. Make sure you use FCQ regularly to increase the life of your fogger. -
Page 13: Technical Specifications
6. T ECHNICAL PECIFICATIONS Dimensions and Length Width Height Weight Weight 20 in (510 mm) 14.7 in (375 mm) 9.8 in (250 mm) 21 lbs (9.6 kg) Note: Dimensions in inches rounded to the nearest decimal digit. Power Power Supply Type Range Voltage Selection 120 VAC, 60 Hz... -
Page 14: Returns
You must send the merchandise prepaid, in its original box, and with its original packing and accessories. CHAUVET® will not issue call tags. Clearly label the package with the RMA number. CHAUVET® will refuse any product returned without an RMA number.