Turning The Unit On; Select The Function; Preparing Espresso - Oster BVSTEM6601 Series Instruction Manual

TURNING THE UNIT ON

a. Make sure unit is plugged in.
b. Turn unit on "I".
The 3 control panel lights will start blinking during heating and until the water reaches the
perfect temperature. Once these lights become solid, the unit is ready to use.
NOTE: It is normal for the Espresso function to be ready before the Cappuccino and
Latte functions.
NOTE: If you leave your unit on for 15 minutes without using, your unit will go into sleep
mode. Press any button to reactivate.

SELECT THE FUNCTION

Custom
Sur mesure

PREPARING ESPRESSO

a. Press the Espresso Button "
b. Press the Espresso Button "
c. Press and hold the Espresso Button " " for 3 seconds to customize the brewing to
your preference. When done, press the Espresso Button "
safety, the unit will automatically stop after brewing 148ml (5 ounces).
a.
x1
The unit will start brewing the espresso according to your selection. The unit will turn
off automatically and the lights will become solid indicating that the cycle has been
completed. Your delicious espresso is ready to be enjoyed.
NOTE: To brew less coffee than the preset serving, press the function button to stop
the brewing process when the amount of coffee desired is reached.
a.
Froth Clean
Mousse Nettoyer
" once to brew one single shot.
" twice to brew a double shot.
b.
b.
Manual
Manuel
x2
10
Custom
Sur mesure
Custom
Sur mesure
Froth
Mousse
" once again to stop it. For
c.
hold for
3 sec.
Froth Clean
Mousse Nettoyer
Ma
Ma
Clean
Nettoyer