Change System Password; Remote Management - D-Link DSL-2540T User Manual

DSL-2540T ADSL Router User Guide

Change System Password

Under the Administrator Settings heading, type the New Password and Confirm Password to be certain you have
typed it correctly. Click the Apply button to activate either the new admin password or the new user password. The
System User Name remains "admin" and cannot be changed using the web manager interface. Be sure to save the new
setting.
top section of the Administrator Settings window

Remote Management

The Administrator Settings window is also used to enable remote Telnet management, remote SSH management and
remote web management access to the Router.
In each case, the procedure to enable remote management of the Router is the same. First, select the State Enabled radio
button for Remote Web Management, Remote Telnet Management, or Remote SSH Management, and then type the IP
Address and Netmask of the remote network or system used for management. Finally, click the Apply button to activate
remote management from the chosen IP address. Be sure to save the new setting.
80