1. Manuals
  2. Brands
  3. D-Link Manuals
  4. Network Router
  5. DSL-2540B - ADSL2/2+ Modem With EN Router
  6. Quick install manual

D-Link DSL-2540B Quick Install Manual

D-link dsl-2540b: install guide
Hide thumbs Also See for DSL-2540B:
Table of Contents

Advertisement

Quick Links

See also: User Manual

Advertisement

Table of Contents
loading

Related Manuals for D-Link DSL-2540B

Summary of Contents for D-Link DSL-2540B

  • Page 2: General Information

    • CD-ROM (User Manual + Drivers) Note: Using a power supply with a different voltage rating than the one included with the DSL-2540B will cause damage and void the warranty for this product. If any of the above items are missing, please contact your reseller.

  • Page 3: Important Safety Instructions

    Important Safety Instructions • Place your router on a flat surface close to the cables in a location with sufficient ventilation. • To prevent overheating, do not obstruct the ventilation openings of this equipment. • Plug this equipment into a surge protector to reduce the risk of damage from power surges and lightning strikes.

  • Page 4: Front Panel View

    A Solid light indicates the DSL is synchronized. A flashing LED indicates the router is attempting to synchronize with the DSL provider. D-Link DSL-540B Quick Install Guide Internet LED A solid green light indicates that the router has an IP address and is connected to the internet.

  • Page 5: Rear Panel View

    Press this button to turn the unit on or off. Power Receptor Receptor for the supplied power adapter. DSL Line Connect to an active telephone line (RJ-11). LAN Port Connect Ethernet devices such as computers, switches, and hubs. D-Link DSL-540B Quick Install Guide...

  • Page 6: Installing The Router

    • To use the Ethernet connection, connect the Ethernet cable from the computer directly to the router. Connect one end of the Ethernet cable to the port labeled LAN on the back of the router and attach the other end to the Ethernet port of your computer.

  • Page 7: Connect The Power Adapter

    POWER connector on the back of the device and plug the adapter into a wall outlet or power strip. Then turn on and boot up your PC and any LAN devices, such as hubs or switches, and any computers connected to them. D-Link DSL-540B Quick Install Guide...

  • Page 8: Installation Diagram

    Installation Diagram D-Link DSL-540B Quick Install Guide...

  • Page 9: Configuring Your Computer

    Configuring Your Computer Prior to accessing the router through the LAN or USB port, note the following necessary configurations: • Your PC’s TCP/IP address: 192.168.1.x(where “x” is any number between 2 and 254) • The router’s default IP address: 192.168.1.1 •...

  • Page 10: Windows Xp

    192.168.1.x(where x is any number between 2 and 254) for the IP address field and 255.255.255.0 for the Subnet Mask field. 5. Click on OK twice to save your changes and then close the Control Panel. D-Link DSL-540B Quick Install Guide ®...

  • Page 11: Log In To The Router

    Log in to the Router This section will explain how to log in to your router using the following steps: 1. Launch your web browser. 2. Enter the URL http://192.168.1.1 in the address bar and press Enter. A login screen like the one below will be displayed after you connect to the user interface.

  • Page 12: Technical Support

    Copyright ©00 D-Link Corporation/D-Link Systems, Inc. All rights reserved. D-Link and the D-Link logo are registered trademarks of D-Link Corporation or its subsidiaries in the United States and other countries. Other trademarks are the property of their respective owners. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead lower actual data throughput rate.

Table of Contents