D-Link DSL-2540T User Manual page 28

15. When you are satisfied that all the WAN settings are configured correctly, click on the Apply button.
16. The new settings must be saved and the Router must be restarted for the settings to go into effect. To save and
reboot the Router, click on the Tools directory tab and then click the System button. In the System Settings
window, click the Save and Reboot button under Save Settings and Reboot the System.
17. Click OK when the following "Save and restart?" dialog box opens.
18. The Router will save the new settings and restart. Upon restarting the Router will automatically establish the WAN
connection.
Settings for PPPoE/PPPoA connections:
PPPoE/PPPoA Parameters
PVC
VPI
VCI
Virtual Circuit
WAN Setting
User Name
Password
Authentication Type
DSL-2540T ADSL Router User Guide
Description
The Router supports using up to eight multiple virtual connections. This
window allows the user to configure WAN settings for all the available
connections (see instructions below on how to set up Multiple Virtual
Connections). Use the PVC drop-down menu to select the connection
Pvc0 Pvc7
( to ) you want to configure. Since most users will use only a
single connection, the default setting
made to the WAN settings.
The Virtual Path Identifier is used with the VCI to define a dedicated
circuit on the ATM network portion of the connection to the Internet and
WAN. Most users will not need to change this setting.
The Virtual Channel Identifier is used with the VPI to define a dedicated
circuit on the ATM network portion of the connection to the Internet and
WAN. Most users will not need to change this setting.
As with the PVC setting, this is mainly for use by clients who are
configuring the Router for multiple virtual connections. Use this to
enable or disable the PVC you are currently configuring. By default, the
Enabled
Pvc0 is and the remaining PVCs are disabled.
Use the drop-down menu to select
Dynamic IP Address
are
For PPP connections, a User Name and Password are used to identify
and verify your account to the ISP. Enter the User Name for your ADSL
service account. User names and passwords are case-sensitive, so enter
this information exactly as given to you by your ISP.
Together with the User Name, this is used to verify your account to the
ISP. Enter the Password exactly as given to you by your ISP.
This specifies the authentication protocol. Most users will want to leave
Auto
the setting on .
21
Pvc0
PPPoE/PPPoA
Static IP Address
, , and
PAP CHAP
and are the other two options
can be used for any changes
. The remaining options
Bridge Mode
.