How To Use - Remington MB4555 Instruction Manual

ENGLISH
BEFORE YOU BEGIN
Always comb your beard or moustache with a fine comb before you start trimming.
USING THE TOUCH SCREEN
ADJUSTING THE TRIM LENGTH
The trimmer comb can be adjusted to give you 175 different trim lengths, with 0.1mm
increase, simply by pressing the arrows on the touch screen. Press and hold the arrow up
to increase the cutting length and down to decrease it. The comb will move to reach each
setting, the lengths will change slowly and then speeds up as you hold the up/down arrow, and
the setting number will appear on the digital display.
NOTE: Trimmer comb must be attached to the groomer in order to use the hair length
TO THIN AND TAPER THE BEARD/MOUSTACHE (DIAGRAM 1)
Use the touch screen to set the trimmer comb to the desired length setting. The setting will
appear on the length position indicator. If you are trimming for the first time start with the
maximum trimming length setting
Turn the unit on.
Place the flat top of the trimmer comb against the skin.
Slowly slide the trimmer through the hair. Repeat from different directions as necessary.
If hair builds up in the trimmer comb during the trimming process, switch the unit off, pull off
the comb and brush off.
TO DEFINE THE BEARD/MOUSTACHE LINE
Remove the trimmer comb attachment.
Start with edge of beard/moustache line and gently lower the trimmer blade onto your skin.
Use motions towards edge of beard/moustache line to trim to desired locations in facial area
and away from beard in neck area.
Shape as desired.
TRIMMING EDGE OF SIDEBURNS (DIAGRAM 2)
Hold the trimmer with the trimmer blade facing you.
Start with edge of sideburn, and with the trimmer blades resting lightly against your skin, use
motions towards edge of sideburn line to trim to desired locations in facial area.
Shape as desired.
TRIMMING THE NAPE OF YOUR NECK
NOTE: You will need a hand mirror for this operation if performing it alone.
Remove the trimmer comb attachment.
Use your fingers to lift the hair at the base of your head up off the neck. Your index finger
should be covering the roots of the hairs you are lifting to prevent accidental removal by
trimmer.
110124_REM_IFU_MB4550_21L.indd 3 110124_REM_IFU_MB4550_21L.indd 3

HOW TO USE

selector. To achieve 0.4mm, the comb must be removed.
3
19.05.11 11:51 19.05.11 11:51