TYAN S1837 User Manual page 99

STEP 4: Click the Start button, then click Run.
STEP 5: When the Run dialog box appears, type a:\setup if you are using
the A drive, or b:\setup if you are using the B drive. Then click OK.
STEP 6: Follow the instructions that appear onscreen.
Computers with NetWare, OS/2, SCO UNIX, and UnixWare
The 7800 Family Manager Set included in the package allows you to install
drivers for NetWare, OS/2, SCO UNIX, and UnixWare. Refer to the 7800 Family
Manager Set User's Guide for installation instructions.
5. Troubleshooting
If you have any problems during the installations, check the following items
first:
• Are all SCSI devices powered on?
• Are all SCSI cables and power cables properly connected?
• Does each device on the SCSI bus have a unique SCSI ID?
• Does the total SCSI cable length exceed the maximum allowable
length?
• Is the SCSI chain properly terminated?
S1837 Thunderbolt
99