Table of Contents
Advertisement
Inserting a new lens
Before changing the lens, always make sure the projector is switched off and fully
disconnected from its power supply.
When changing the lens, avoid using excessive force as this may damage the
equipment.
Take care to preserve the original lens packaging and protective caps for future use.
The projector will not power on without the lens fitted.
1.
Remove the remote lock cover next to the lens aperture - loosen the two captive screws
and release the lock
Insert the lens into the aperture so that the wide ends of the keyhole slots
2.
location pins
2
using the provided key.
.
4
3
3
3
Important Information
1
1
2
3
accommodate the
4
4
4
1
Page 29
Advertisement
Table of Contents
