Symbols Used In The User Manual; Electrical And Physical Specifications; Non-Accessible Laser Parameters - NEC NP-PH1201QL User Manual

Table of Contents

Advertisement

Symbols used in the User Manual

LASER WARNING: this symbol indicates that there is a potential hazard of eye exposure to laser
radiation unless the instructions are closely followed.
ELECTRICAL WARNING: this symbol indicates that there is a danger of electrical shock unless
the instructions are closely followed.
WARNING: this symbol indicates that there is a danger of physical injury to yourself and/or
damage to the equipment unless the instructions are closely followed.
NOTE: this symbol indicates that there is some important information that you should read.
Specifications are subject to change without notice.

Electrical and physical specifications

Mains Voltage
Operating Temperature
Operating Temperature (Portrait Mode) 0°C to 30°C (32 to 86F)
Storage Temperature
Operating Humidity
Weight
Power Consumption
Thermal Dissipation

Non-accessible laser parameters

Wavelength
Laser Power for classification
Total internal power
Apparent Source Size
Divergence
Mode of operation
Modulation, due to frame rate
200-240 VAC
50-60 Hz (single phase)
0°C to 35°C (32 to 95F)
-10°C to 50°C (14 to 122F)
20% to 80% non-condensing
67 kg (148 lb) without lens
1600 W
5027 BTU/hr
435 - 462 nm
< 330 mW
< 35 W
< 10 mm at aperture
≤ ± 7.3 - 28°, lens dependent
CW
23 - 192 Hz
Important Information
Page 5

Advertisement

Table of Contents
loading

Table of Contents